Spa Frog Hot Tub Bromine/Water Conditioning Floating System
Regular price £49.99 ⓘ We offer the best value prices in the UK! You won't find this quality at this price anywhere else.
Unit price ⓘ We offer the best value prices in the UK! You won't find this quality at this price anywhere else.
Features we love
- Bromine sanitiser for clean spa water
- Softer on skins than chlorine
- No strong odour or bleached swimwear!
- Conditions the water for a softer feel
- Helps maintain a neutral pH
- Polishes the water for clarity
- Pre-filled for no mess, no guess, no stress
All about me
SPA FROG Floating System uses pre-filled conditioning and bromine cartridges that snap into a reusable floating holder and works in any hot tub.
The SPA FROG® Floating System transforms your spa into the perfect environment for soothing relaxation with up to 50% - 80% less bromine than standard bromine spas. Cartridges are easily adjusted to meet the sanitising needs of virtually any size spa.
Need to know
Replace the conditioning cartridge every 4 months when you drain and refill your spa. The bromine cartridge will last 2-4 weeks depending on use.
The changes in the laws and regulations in Europe with regard to the use of silver are defined by many nations. Therefore, we Spa Frog have replaced the mineral cartridge with the NEW conditioning cartridge.
How to use
Getting your hot tub ready for Spa Frog
- Drain and refill your hot tub at least every 4 months
- Clean and replace filter cartridges when dirty
- Balance water as follows:
PH: 7.2-7.8
Total Alkalinity: 80-120ppm
Calcium Hardness: 150-250
Total Dissolved Solids: <1500
Free Bromine: 3.0-5.0ppm
- Before using cartridges, establish an initial residual of 3-5ppm bromine or chlorine with a granular brominating concentrate (which typically contains 85% sodium dichlor (chlorine) and 15% sodium bromide) OR a chlorine shock.
Setting up the cartridges
- Set the blue conditioning cartridge to wide open on #6 by holding the bottom and turning the top until the number 6 shows in the setting window. No further adjustments are necessary for this cartridge until it runs out.
- With a freshly filled spa, initially set the yellow bromine cartridge on #5 for the first 24 hours ONLY.
- For the first week or so, before each use, test the water and adjust the cartridge by 1 setting per day until the bromine stabilises to at least 3ppm.
Using the floating system
- Insert both cartridges into the green floating holder by pushing them into the openings until they stay in place.
- Let the Spa Frog System free-float in the spa.
- When using the spa simply remove the SPA FROG system, drain most of the water into the spa and set to the side of the spa upside-down so that all excess water drains into the holder.
- Then place back in when you have finished using the spa.
Replacing the cartridges
- Replace the blue conditioning cartridge every 4 months, or when draining and refilling your hot tub
- Replace the yellow bromine cartridge when empty, usually every 2 to 4 weeks
- Drain water to ensure the cartridge is empty, then discard to general waste
FAQs
What does Spa Frog do?
If you are tired of chlorine odours and having to spoon in chemicals every time you use your hot tub, Spa Frog is for you. Combining bromine sanitiser with water conditioner, you’re left with soft water without bleached swimwear or that chlorine smell.
How long does Spa Frog last?
The bromine cartridge will last 2-4 weeks depending on use. The conditioning cartridge will last up to 4 months.
Can I remove Spa Frog when not in use?
Yes simply turn your SpaFrog upside down on any surface so the water fills the green holder and doesn’t make a mess. Just remember to replace it when you exit the tub.
If you need more information on using bromine in your tub, check out our bromine hot tub maintenance guide.